Showing posts with label Power Quality Importance. Show all posts
Showing posts with label Power Quality Importance. Show all posts

Tuesday, 11 September 2018

Power Line Disturbances - Transients

Lightning strikes and switching transients on power lines will propagate down the line and eventually arrive at a substation. There, the voltage will be clamped by lightning arresters to a level the substation equipment can handle without damage. This voltage will be passed on to the distribution lines in two forms: differential and common modes. The differential-mode voltage is the voltage between the power line conductors themselves, and it does not directly involve voltages to ground. The common-mode voltages are the voltages of the several conductors to ground.

Differential-mode voltages are passed directly through transformers and appear on the secondaries as transformed by the turns ratio. Some attenuation may result from intra-winding capacitance, but inter winding capacitances may actually increase the voltage.

Common-mode voltages are transferred to the secondary through the inter winding capacitances and can be effectively stopped by an electrostatic shield between the windings. Absent the shield, however, they can appear on the secondaries with a magnitude close to that on the primary.

This can be a severe problem on medium-voltage systems where there is the possibility of 10 kV or more being developed on secondaries to ground. The best protection from line-induced transients of all types on secondaries is a set of MOVs.

Line-to-line MOVs on the secondary are best for differential-mode voltages, and line-to-ground MOVs will provide the best protection from common-mode voltages if a shield is not used.

An electrostatic shield (Faraday screen) is a relatively low cost addition to a transformer, and it is a good practice to specify a shield on transformers with medium-voltage primaries. With a shield, line-to-line MOVs are likely to provide sufficient transient protection.

Dry-type transformers should be equipped with at least distribution-class lightning arresters on medium-voltage circuits.

FOR POWER QUALITY STUDY & AUTOMATED REPORT:   Connect with Emerich Energy

Please write to us info@emerich.in Call: 044-48577667

Thursday, 24 May 2018

Importance of Power Quality



Good power quality is extremely important in “high-tech” facilities such as manufacturing plants, data centres, hospitals, and, as well as in “low-tech” facilities such as government buildings and commercial enterprises with limited tolerance for electrical disturbances.


Compromised power quality can have costly repercussions, ranging from premature aging/damage of equipment to reduced productivity and interference with business as usual. Common causes of variations in power quality include voltage sags, spikes, and swells, short and long interruptions of power lasting from a few milliseconds to 2+ seconds, and harmonic disturbances.

Facilities vested in good power quality can take advantage of power quality monitoring systems that, operating 24/7, use hardware including sensors and meters to measure electrical sensitivity, software to record and interpret the data, and wired and wireless communications to inform management about what went wrong that affected power quality and where in the electrical system it happened. Power quality monitoring also can keep tabs on a facility’s emergency/backup and/or standby power system.

1. Early detection of an incipient problem. Awareness of a problem early on, before it escalates and when it is easy to address, minimizes the likelihood of costly interruptions to operations and, possibly, avoids the need for emergency repairs during inconvenient times.

2. Power quality analysis that takes advantage of continuously recorded waveforms that can identify such anomalies as power outages, sags and swells, and transient harmonics, cycle by cycle in milliseconds, can compare current operating parameters of electrical equipment against the manufacturer’s baseline to detect any anomalies that could lead to inefficient operation or failure. The ability to review stored, continuously recorded waveform helps in the diagnosis of problems before an unwanted event recurs.

3. Power quality analytics also supports forensics, allowing management to determine how a chain of events occurred as it did, such as why a facility lost a particular breaker that tripped the power distribution unit and resulted in a switch over to the UPS. Power quality analytics could, in that scenario, pinpoint what the root cause was – e.g. a short, an electrical spike, or a floating ground.It can also pinpoint power quality problems that can prematurely age equipment.

4. Power quality analysis can also be used for pre-function testing to look closely at systems and their responses and to simulate transients and other events. Historical records become a baseline that can be compared to equipment and component performance over time, enabling detection of performance trends that can be interpreted to enhance preventive maintenance programs, predict future power requirements, and aid in plans for additional electrical equipment, such as servers or variable frequency drives to control energy costs.

Please click the below link to understand the Power Quality Investments and ROI for Industries, Commercial Buildings



FOR POWER QUALITY STUDY & AUTOMATED REPORT:  Connect with Emerich Energy
Please write to us info@emerich.in Call: 044-48577667